Configure Intrusion Prevention

Configure the Intrusion Prevention module (IDS/IPS) to define its behavior for a policy.

When designing the modules behavior and implementing it using the API, use the same background information and guidance that is provided in the Deep Security Help Center.

Policy objects contain two objects that you use to configure the Intrusion Prevention module:

  • IntrusionPreventionPolicyExtension: Controls the module state (prevent, detect, or off), identifies the applied Intrusion Prevention rules, and identifies application types that are assigned to the module.
  • PolicySettings: Policy settings include many Intrusion Prevention-related settings that control the runtime behavior of the module, such as the application of recommendation scans, network engine settings, and the use of NSX security tags.

After you create these objects and add them to a Policy object, you use the PoliciesApi class to modify an existing policy based on the Policy object.

The following JSON represents the data structure of an IntrusionPreventionPolicyExtension object:

{
    "state": "prevent",
    "moduleStatus": {...},
    "ruleIDs": [...],
    "applicationTypeIDs": [...]
}

The moduleStatus property is read-only. It provides the runtime status of the Intrusion Prevention module. (See Report on Computer Status.)

General steps

Use the following steps to configure the Intrusion Prevention module:

  1. Create an IntrusionPreventionPolicyExtension object and configure the properties.
  2. Create a PolicySettings object to configure runtime settings of the module.
  3. Create a Policy object and add the IntrusionPreventionPolicyExtension and PolicySettings objects.
  4. Use a PoliciesApi object to add or update the policy on Deep Security Manager.

If you only need to set a single Intrusion Prevention-related policy setting, see Configure a single policy or default policy setting.

Create an IntrusionPreventionPolicyExtension object to set the module state and assign rules:

Python
ip_policy_extension = api.IntrusionPreventionPolicyExtension()
ip_policy_extension.state = "prevent"
ip_policy_extension.rule_ids = rule_ids
JavaScript
const ipPolicyExtension = new api.IntrusionPreventionPolicyExtension();
ipPolicyExtension.state = api.IntrusionPreventionPolicyExtension.StateEnum.prevent;
ipPolicyExtension.ruleIDs = ruleIDs;
Java
IntrusionPreventionPolicyExtension ipPolicyExtension = new IntrusionPreventionPolicyExtension();
ipPolicyExtension.setState(StateEnum.PREVENT);
ipPolicyExtension.setRuleIDs(ruleIDs);

Create a PolicySettings object to configure Intrusion Prevention-related settings. (For detailed information about policy settings, see Configure policy and default policy settings.) For example, you can automatically apply Intrusion Prevention rules that are found via recommendation scans:

Python
policy_settings = api.PolicySettings()
setting_value = api.SettingValue()
setting_value.value = "yes"
policy_settings.intrusion_prevention_setting_auto_apply_recommendations_enables = setting_value
JavaScript
const policySettings = new api.PolicySettings();
const settingValue = new api.SettingValue();
settingValue.value = "yes";
policySettings.intrusionPreventionSettingAutoApplyRecommendationsEnabled = settingValue;
Java
PolicySettings policySettings = new PolicySettings();
SettingValue settingValue = new SettingValue();
settingValue.setValue("Yes");
policySettings.setIntrusionPreventionSettingAutoApplyRecommendationsEnabled(settingValue);

At this point, the Intrusion Prevention policy extension and the policy settings are configured. Next, they are added to a Policy object. Then,use a PoliciesApi object to modify a policy on Deep Security Manager.

Python
policy = api.Policy()
policy.IntrusionPrevention = ip_policy_extension
policy.policy_settings = policy_settings

policies_api = api.PoliciesApi(api.ApiClient(configuration))
modified_policy = policies_api.modify_policy(policy_id, policy, api_version)
JavaScript
const policy = new api.Policy();
policy.IntrusionPrevention = ipPolicyExtension;
policy.policySettings = policySettings;

const policiesApi = new api.PoliciesApi();
return policiesApi.modifyPolicy(policyID, policy, apiVersion, { overrides: false });
Java
Policy policy = new Policy();
policy.setIntrusionPrevention(ipPolicyExtension);
policy.setPolicySettings(policySettings);

PoliciesApi policiesApi = new PoliciesApi();
Policy modifiedPolicy = policiesApi.modifyPolicy(policyId, policy, Boolean.FALSE, apiVersion);

The policy_id (or policyID) parameter of modifyPolicy identifies the actual policy on Deep Security Manager that is to be modified. This policy is modified according to the policy object that is used as the policy parameter. Any properties of the policy parameter that are not set remain unchanged on the actual policy.

Example

The following example code creates a PolicySettings object and sets the module state, assigns rules, and sets the value of the intrusionPreventionSettingAutoApplyRecommendationsEnables property to cause intrusion prevention to automatically apply rules found via recommendation scans. The object is added to a Policy object that is used to modify a policy.

Python
source
# Run in prevent mode
ip_policy_extension = api.IntrusionPreventionPolicyExtension()
ip_policy_extension.state = "prevent"

# Assign rules
ip_policy_extension.rule_ids = rule_ids

# Add to a policy
policy = api.Policy()
policy.IntrusionPrevention = ip_policy_extension

# Configure the setting
policy_settings = api.PolicySettings()
setting_value = api.SettingValue()
setting_value.value = "yes"
policy_settings.intrusion_prevention_setting_auto_apply_recommendations_enables = setting_value

# Add the setting to a policy
policy.policy_settings = policy_settings

# Modify the policy on Deep Security Manager
policies_api = api.PoliciesApi(api.ApiClient(configuration))
modified_policy = policies_api.modify_policy(policy_id, policy, api_version)

return modified_policy.id
JavaScript
source
const policy = new api.Policy();
const policiesApi = new api.PoliciesApi();
const ipPolicyExtension = new api.IntrusionPreventionPolicyExtension();

// Run in prevent mode
ipPolicyExtension.state = api.IntrusionPreventionPolicyExtension.StateEnum.prevent;

// Assign rules
ipPolicyExtension.ruleIDs = ruleIDs;

// Add to the policy
policy.IntrusionPrevention = ipPolicyExtension;

// Configure the setting
const policySettings = new api.PolicySettings();
const settingValue = new api.SettingValue();
settingValue.value = "yes";
policySettings.intrusionPreventionSettingAutoApplyRecommendationsEnabled = settingValue;

// Add to a policy
policy.policySettings = policySettings;

// Modifies the policy on Deep Security Manager
const modify = function() {
  return policiesApi.modifyPolicy(policyID, policy, apiVersion, { overrides: false });
};

modify()
  .then(policy => {
    resolve(policy.ID);
  })
  .catch(error => {
    reject(error);
  });
Java
source
// Run in prevent mode
IntrusionPreventionPolicyExtension ipPolicyExtension = new IntrusionPreventionPolicyExtension();
ipPolicyExtension.setState(StateEnum.PREVENT);

// Assign rules
ipPolicyExtension.setRuleIDs(ruleIDs);

// Add to a policy
Policy policy = new Policy();
policy.setIntrusionPrevention(ipPolicyExtension);

// Create a setting object and turn on automatic application of recommendation scans
PolicySettings policySettings = new PolicySettings();
SettingValue settingValue = new SettingValue();
settingValue.setValue("Yes");
policySettings.setIntrusionPreventionSettingAutoApplyRecommendationsEnabled(settingValue);

// Add to a policy
policy.setPolicySettings(policySettings);

// Update the policy on Deep Security Manager
PoliciesApi policiesApi = new PoliciesApi();
return policiesApi.modifyPolicy(policyId, policy, Boolean.FALSE, apiVersion).getID();

Also see the Modify a Policy operation in the API Reference.

If you only need to add, remove, or list Intrusion Prevention rules for a policy, use the PolicyIntrusionPreventionRuleAssignmentsApi class. The previous example uses the IntrusionPreventionPolicyExtension, Policy, and PoliciesApi classes to add Intrusion Prevention rules, but this can also be done using only the PolicyIntrusionPreventionRuleAssignmentsApi class. For more information, see Policy Intrusion Prevention Rule Assignments and Recommendations in the API Reference.

For information about authenticating API calls, see Authenticate with Deep Security Manager.

Create an Intrusion Prevention rule

Generally, to create a rule for the Intrusion Prevention module you perform the following steps:

  1. Create an IntrusionPreventionRule object.
  2. Set the rule properties.The properties are described in the Deep Security Help Center.
  3. Use an IntrusionPreventionRulesApi object to add the rule to Deep Security Manager.

Although Log Inspection rules have different properties than Intrusion Prevention rules, the way you create the rules are similar. You might find the Create a basic Log Inspection rule example helpful.

Configuration options of Intrusion Prevention rules are not accessible using the API. To change these options, in the Deep Security Manager console open the rule properties and click the Configuration tab.