Configure Integrity Monitoring

Configure the Integrity Monitoring module to define its behavior for a policy.When designing the modules behavior and implementing it using the API, use the same background information and guidance that is provided in the Deep Security Help Center.

Policy objects contain two objects that you use to configure the Integrity Monitoring module:

• IntegrityMonitoringPolicyExtension: Controls the module state (real-time, on, or off) and identifies the Integrity Monitoring rules that are assigned to the module.
• PolicySettings: Policy settings include many Integrity Monitoring-related settings that control the runtime behavior of the module, such as the application of recommendation scans, whether real-time scan is enabled, performance-related settings, and the Syslog configuration to use. (See Configure policy and default policy settings.)

After you create these objects and add them to a Policy object, you use the PoliciesApi class to modify an existing policy based on the Policy object.

The following JSON represents the data structure of an IntegrityMonitoringPolicyExtension object:

{
    "state": "on",
    "moduleStatus": {...},
    "ruleIDs": [...]
}

The moduleStatus property is read-only. It provides the runtime status of the Integrity Monitoring module. (See Report on Computer Status.)

General steps

Use the following steps to configure the Integrity Monitoring module:

1. Create an IntegrityMonitoringPolicyExtension object and set the property values.
2. Create a PolicySettings object to configure runtime settings of the module. (See Configure policy and default policy settings.)
3. Create a Policy object and add the IntegrityMonitoringPolicyExtension and PolicySettings objects.
4. Use a PoliciesApi object to add or update the policy on Deep Security Manager.

Create an IntegrityMonitoringPolicyExtension object and set the module state:

policy_config_integrity_monitoring = api.IntegrityMonitoringPolicyExtension()
policy_config_integrity_monitoring.state = "on"

const integrityMonitoringPolicyExtension = new api.IntegrityMonitoringPolicyExtension();
integrityMonitoringPolicyExtension.state = api.IntegrityMonitoringPolicyExtension.StateEnum.on;

IntegrityMonitoringPolicyExtension integrityMonitoringPolicyExtension = new IntegrityMonitoringPolicyExtension();
integrityMonitoringPolicyExtension.setState(StateEnum.ON);

Set the rule IDs. Note that the Integrity Monitoring rules that are currently assigned to the policy will be overwritten:

policy_config_integrity_monitoring.rule_ids = im_rule_ids

integrityMonitoringPolicyExtension.ruleIDs = imRules;

integrityMonitoringPolicyExtension.setRuleIDs(ruleIds);

At this point, the integrity Monitoring policy extension is configured. Next, it is added to aPolicyobject. Then use aPoliciesApiobject to modify a policy on Deep Security Manager.

policy = api.Policy()
policy.integrity_monitoring = policy_config_integrity_monitoring

policies_api = api.PoliciesApi(api.ApiClient(configuration))
modified_policy = policies_api.modify_policy(policy_id, policy, api_version)

const policy = new api.Policy();
policy.integrityMonitoring = integrityMonitoringPolicyExtension;

const policiesApi = new api.PoliciesApi();
return policiesApi.modifyPolicy(policyID, policy, apiVersion, { overrides: false });

Policy policy = new Policy();
policy.setIntegrityMonitoring(integrityMonitoringPolicyExtension);

PoliciesApi policiesApi = new PoliciesApi();
Policy modifiedPolicy = policiesApi.modifyPolicy(policyId, policy, Boolean.FALSE, apiVersion);

Thepolicy_id(orpolicyID) parameter ofmodifyPolicyidentifies the actual policy on Deep Security Manager that is to be modified. This policy is modified according to the policy object that is used as thepolicyparameter. Any properties of thepolicyparameter that are not set remain unchanged on the actual policy.

Example

The following example turns on Integrity Monitoring and sets the rule IDs for anIntegrityMonitoringPolicyExtensionobject. The object is added to a Policy object which is used to update a policy on Deep Security Manager.

# Turn on Integrity Monitoring
policy_config_integrity_monitoring = api.IntegrityMonitoringPolicyExtension()
policy_config_integrity_monitoring.state = "on"

# Add the rule IDs
policy_config_integrity_monitoring.rule_ids = im_rule_ids

# Add to a policy
policy = api.Policy()
policy.integrity_monitoring = policy_config_integrity_monitoring

# Modify the policy on Deep Security Manager
policies_api = api.PoliciesApi(api.ApiClient(configuration))
modified_policy = policies_api.modify_policy(policy_id, policy, api_version)
return modified_policy.id

// Turn on Integrity Monitoring
const integrityMonitoringPolicyExtension = new api.IntegrityMonitoringPolicyExtension();
integrityMonitoringPolicyExtension.state = api.IntegrityMonitoringPolicyExtension.StateEnum.on;

// Add rule IDs
integrityMonitoringPolicyExtension.ruleIDs = imRules;

// Add to a policy
const policy = new api.Policy();
policy.integrityMonitoring = integrityMonitoringPolicyExtension;

// Modifies the policy on Deep Security Manager
const modify = () => {
  const policiesApi = new api.PoliciesApi();
  return policiesApi.modifyPolicy(policyID, policy, apiVersion, { overrides: false });
};

return modify()
  .then(modifiedPolicy => {
    resolve(modifiedPolicy.ID);
  })
  .catch(error => {
    reject(error);
  });

// Set the state
IntegrityMonitoringPolicyExtension integrityMonitoringPolicyExtension = new IntegrityMonitoringPolicyExtension();
integrityMonitoringPolicyExtension.setState(StateEnum.ON);

// Add the rule IDs
integrityMonitoringPolicyExtension.setRuleIDs(ruleIds);

// Add to a policy
Policy policy = new Policy();
policy.setIntegrityMonitoring(integrityMonitoringPolicyExtension);

// Update the policy on Deep Security Manager
PoliciesApi policiesApi = new PoliciesApi();
return policiesApi.modifyPolicy(policyId, policy, Boolean.FALSE, apiVersion).getID();

Also see the Modify a Policy operation in the API Reference.

If you only need to add, remove, or list Integrity Monitoring rules for a policy, use the PolicyIntegrityMonitoringRuleAssignmentsApi class. The previous example uses the IntegrityMonitoringPolicyExtension, Policy, and PoliciesApi classes to set rules, but this can also be done using only the PolicyIntegrityMonitoringRuleAssignmentsApi class. For more information, see Policy Integrity Monitoring Rule Assignments and Recommendations in the Policies section of the API Reference.

For information about authenticating API calls, see Authenticate with Deep Security Manager.

Create an Integrity Monitoring rule

Generally, to create a rule for the Integrity Monitoring module you perform the following steps:

1. Create an IntegrityMonitoringRule object.
2. Set the rule properties.Rules are described in the Deep Security Help Center.
3. Use an IntegrityMonitoringRulesApi object to add the rule to Deep Security Manager.

Although Log Inspection rules have different properties than Integrity Monitoring rules, the way you create the rules are similar. You might find theCreate a basic Log Inspection rule and Create a Log Inspection rule using XML examples helpful.

To use the API to create an Integrity Monitoring rule, send a POST request to the integritymonitoringrules endpoint. (See the Create an Integrity Monitoring Rule operation in the API Reference.)